SET Countersink HSS-XE blue – 90° 6.3, 10.4, 16.5, 20.5, 25mm

The flutes of Karnasch High-Performance countersinkers are always CBN ground. This guarantees: Excellent chip clearance / chatter-free working / scratch-free surface / best centering. CONTENT: 5 HSS-XE Countersink DIN 335 Type C 90Degrees, 3-Flat-Shank 201765:
1 pc each Diameter: 6,3 – 8,3 – 10,4 – 12,4 – 16,5 – 20,5 mm HSS-XE STEEL + BLUE-TEC coated: Made Of High-Alloyed Special Steel Xe“ For Considerably Longer Service Life Than Hss-Steel.
BLUE-TEC coating For A Further Substantial Increase In Service Life Also When Machining Dry (No/Little Cooling) RAPID-CUT specially developed for automatic and quick feed. Optimized
cutting geometry + 3 flat sections of the shank leads to: up to 30% faster sinking than conventional countersinks up to 40% higher service life 3-Flat shank for:
– Excellent torque transmission
– No slippage in the drill chuck
– This results to superior cutting output Each diameter receives its own relief angle. Result: The cutting edge is also always the highest point. According to the diameter radially-adjusted CBN ground relief. Result: The cutting edge is always the highest point of the diameter Axial relief produces by CBN grinding leads to a smooth and low-heat cut. CBN deep-ground flutes leads (unlike miled grooves) to significantly smoother and sharper cutting edges. This result is: Higher cutting performance and tool life.