Carbide tipped hole saw Power-Max 30 Hole saw body only; drill depth 30mm d=66mm

Karnasch hole saws offer best flexibility: The “Easy-Change” quick-change system of the “POWER-MAX” hole saws series for almost unlimited use on hand-drilling machines, pillar drilling machines, radial drilling machines, turning machines and core drilling machines. The POWER-MAX hole saw range permits processing of woods and chipboards. It is also great for drilling in non-ferrous metals such as aluminium, copper and brass and ideal for drilling in plastics, CFK / GFK and sandwich-material. POWER-MAX Hole Saws are available in the diameter range of 14 – 150mm, at cutting depths of 12 – 60mm. Handheld machines:

• Maximum recommended Diameter 40mm
• Maximum recommended cutting depth 25mm
• Maximum possible cutting depth 30mm

Stationary and core drilling machines:

• Maximum recommended Diameter 150mm
• Maximum recommended cutting depth 30mm
• Maximum possible cutting depth 30mm

Super heavy construction:

• All hole saws comes with exchangeable shank and drill
• Quick removal of drilled core through ejector spring for hole saws Diameter 19-150 mm
• Quick removal of drilled core possible from Diameter 14 mm see Power-Drill 4000 System.
• For larger diameter Diameter, see art. 201025

USAGE:
For material thickness over 15 mm it may be necessary (depending on the chip flow) to lift the drill and remove the chips several times. If drilling maximum cutting depth please remove the ejector spring. Use only good cutting oil for metals (see art. 601150).